commit 0032e7613c03af05566aeab36879cda102d81472
Author: Bliblank <pmcgeee03@gmail.com>
Date:   Thu Oct 8 21:37:02 2026 -0500

    add knurled knob that I already made

diff --git a/knurled_knob.scad b/knurled_knob.scad
new file mode 100644
index 0000000..c0d03f0
--- /dev/null
+++ b/knurled_knob.scad
@@ -0,0 +1,76 @@
+
+$fa = 4;
+$fs = 0.2;
+
+body_height = 10;
+body_diameter = 24;
+
+bevel_height = 1;
+bevel_width = 1;
+
+knurl_width = 1.2;
+knurl_depth = 0.8;
+knurl_count = 36;
+knurl_angle = 110*(body_height-2*bevel_height)/body_diameter; // idk where 110 comes from
+
+// m5: 5.4, 9.2, 3.4
+// m3: 3.2, 6.2, 3.0
+hole_diameter = 3.2;
+bolt_head_width = 5.6;
+bolt_recess_depth = 3.0;
+
+module main() {
+    difference() {
+        
+        cylinder(body_height, d1 = body_diameter, d2 = body_diameter, center = true);
+        
+        bevel(1);
+        bevel(-1);
+        
+        knurl_cuts(1);
+        knurl_cuts(-1);
+        
+        cylinder(body_height, d1 = hole_diameter, d2 = hole_diameter, center = true);
+        hex_recess();
+    }
+}
+
+module bevel(face) { // 1 for top and -1 for bottom
+    translate([0, 0, face*(body_height/2 - bevel_height)])
+    rotate_extrude() {
+        translate([body_diameter/2, 0, 0])
+        polygon([[0, 0], [0, bevel_height*face], [-bevel_width, bevel_height*face]]);
+    }
+}
+
+module knurl_cuts(direction) { // 1 for cw and -1 for ccw
+    for(i = [1:1:knurl_count]) {
+        linear_extrude(body_height-2*bevel_height, center=true, twist=knurl_angle*direction) {
+            knurl_triangle = [[-knurl_width/2, 0], [knurl_width/2, 0], [0, knurl_depth*sqrt(3)/2]];
+            
+            rotate([0, 0, 360/knurl_count * i])
+            translate([0, -body_diameter/2 - 0.05, 0])
+            polygon(knurl_triangle);
+        }
+    }
+}
+
+module hex_recess() {
+    edge_length = bolt_head_width/2;
+    x = edge_length * sqrt(3)/2;
+    y = edge_length;
+    a = [y/2, x];
+    b = [y, 0];
+    c = [y/2, -x];
+    d = [-y/2, -x];
+    e = [-y, 0];
+    f = [-y/2, x];
+    hexagon = [a, b, c, d, e, f];
+    
+    translate([0, 0, -(body_height-bolt_recess_depth)/2])
+    linear_extrude(bolt_recess_depth, center=true) {
+        polygon(hexagon);
+    }
+}
+
+main();